Personal tools
You are here: Home Documentation Student Reports and Theses

Student Reports and Theses

Workterm reports and theses on T2K

Adam Schneider SFU Dec 2003
Initial neutrino detector R&D - long term stability of PMT's, tests of WLS fibres and Carbostyril 124 shifter with sources and beam particles.
Adam Schneider SFU April 2004
ND280 simulation studies with GEANT3; study of recoil proton reconstruction efficiency as a function of momentum
Jenna King U of Regina May 2004
Water scintillator FGD research - search for suitable liquid scintillator and gelling agents
Jenna King U of Regina Aug 2004
Water scintillator FGD research - continuing search for gelling agents, beam tests of light output of scintllating gel mixtures, aging tests on WLS fibres, tests of biological inhibitors in gel.
Christie McPhee UBC Dec. 2006
Positive pressure measurements of panel deformation for water target, water level monitoring, water permeability tests, glue tests
cover pages for Bonnick Dec 2004 report
 
Patrick Bonnick U of Guelph Dec 2004
Water Scintillator FGD research - tests of chemical corrosion of plastics and fibres, beam tests of light output versus Quicksafe A and PPO/POPOP concentration, construction of prototype 1-cell water scintillator detector.
Patrick Bonnick U of Guelph Aug05
Water scintillator FGD research - addition of PPO/POPOP, cloud points and light yields for liquid scintillators with Tergitol NP-13 and NP-15, temperature dependence of light yield, painting of Matraplast cells, cross talk and attenuation length measurements
Jerry Wong U of Waterloo April 2005
Water scintillator FGD research - measurement of cloud points of liquid scintillator cocktails with various surfactants, measurement of water absorption by polypropylene and RTV silicone.
Peter Lee UBC April 2006
Tests of various glues for use in FGD
Hiroko Nakahara UBC April 2006
Water scintillator FGD research - optimization of amounts of primary and secondary fluors, beam tests of effect on light output of organics and zinc as biological inhibitors, construction of airbrush for spraying protective/reflective paint.
Jerome Coulombe UBC August 2006
MSc thesis---FGD water scintillator prototyping, fluid sealing techniques
Frank Berghaus MSC thesis (UBC--April 2006)
Frank Berghaus MSc thesis on kiloton manipulator arm
Martyn Bryant Master's Thesis
Martyn Bryant's MSc thesis at UBC (August 2007)---FGD scintillator production and testing. Also includes fiber light distribution study.
USRA Summer Work Report
This report includes my work on noise reduction and analysis for the M11 Beamline tests with Dr. Peter Kitching in addition to Light Injection simulations conducted under the supervision of Dr. Scott Oser. This work was done over the summer of 2007 by me, Nikhil Jain, under an NSERC USRA grant. (Open Office Writer Document)
USRA - Software explanation
This report includes describes the pieces of software I made/used, and how to use them. Nikhil Jain
Prototyping and Simulation of the T2K OTR Monitor
A detailed report of my work on the OTR system during the summer of 2007.
Nikhil Jain - USRA Summer Work Report v2
This report includes my work on noise reduction and analysis for the M11 Beamline tests with Dr. Peter Kitching in addition to Light Injection simulations conducted under the supervision of Dr. Scott Oser. This work was done over the summer of 2007 by me under an NSERC USRA grant. (pdf file)
Simon Hastings (MSc thesis)
 
Bojechko Defense Slides
 
November 2020 »
November
MoTuWeThFrSaSu
1
2345678
9101112131415
16171819202122
23242526272829
30